Quote:
I looked but in the test i set everything in passive mode.
The test itself doesn't care what you have set. There is no test for Passive mode in FileZilla, as Passive mode requires no client configuration.Quote:
On an other machine a nake a direct connection to the internet, with a USB modem and on this machine the client is working properly, even with the firewall active.
Without a client NAT layer Active mode (and thus the test) works properly.Quote:
In the test ai give a port range of 14000 - 15000. Do i need to do something in the NAT with this ports.
In Active mode the data connections are incoming. Thus you need to forward these ports in your router. For the exact procedure consult the router manual.Quote:
In port mapping i can give a local ip, protocol and port and a public port. Do i need to map the port range from the internal to the external?
The other way. Port forwardings always are for incoming connections, never for outgoing ones.Please note that a failing Passive mode data connection is almost always a problem with the server, not the client.